CP96SDB40-100C TIE-ROD CYLINDER DOUBLE ACTING
CP96SDB40-100C TIE-ROD CYLINDER DOUBLE ACTING
CP96, profile design ISO cylinder with enclosed tie rods, is available in 6 bore sizes from ?32 to ?125mm.? High accuracy covers and tie rod nuts improve mounting accuracy and extend the cylinder life.? Increasing the precision of the bushing and piston rod, as well as reducing tolerances, has decreased the deflection of the piston rod.? Standard strokes range from 25 to 800mm.- Double Acting
- Bore Sizes 32, 40, 50, 63, 80, 100, 125
- End of Stroke Cushioning
Hot
SMC AC30A-02DG-D FRL UNIT NO RC 1/4"
SMC AC30A-02DG-D FRL UNIT NO RC 1/4"
SMCs new AC series of modular type F.R.L. unit is available in 4 sizes and is interchangeable with the existing modular type AC line. The element and bowl on the AW and AF series is now one-piece, making element replacement easier. Required maintenance space has been reduced by as much as 46% on the AF series, depending on the body size. Bowls on size 30 or more are now covered with a transparent bowl guard, completely protecting them from the environment, and making the inside visible from 360 degrees. The base color of the new AC series is urban white, maintaining a clean, modern look.- Air filter, regulator and lubricator unit
- Clean looking, urban white, modular design
- Energy saving with high flow rate
- Transparent bowl guard
- New spacer for modular connection is interchangeable with existing product
- Improved installation
- Rc, G or NPT threads
VXS255HGA 2/2 PORT SOLENOID VALVE 3/4"
SMC-VXS255HGA
Two Port Pilot Operated Solenoid Valve
Zero pressure differential pilot solenoid valves from SMC requiring no fluid pressure for operation suitable for use with steam and heated water. Service life has been increased to 3 million cycles by using an improved scraper design that is contaminant resilient. Air leakage has also been reduced. This new series of solenoid valves are also greener consuming less energy and quieter in operation due to a rubber buffer design.
- Reduced power consumption
- Standardized 24 V dc DIN terminal
- Minimal internal air leakage
- Stainless Steel or Brass body
- Low noise operation
- Improved armature durability
- Double guide rings for improved foreign object resistance
SMC CS95-50 SEAL KIT 50DIA C95/C96
SMC CS95-50 SEAL KIT 50DIA C95/C96
The C95 is ISO, VDMA24562 interchangeable, and utilizes a tie rod construction. In addition to standard cushions and wear band, the C95 utilizes a "floating" cushion seal design that greatly improves operation.SMC VM01F ROLLER LEVER EXCLUSIVE FOR VM800
SMC VM01F ROLLER LEVER EXCLUSIVE FOR VM800
The VM series is a mechanical, poppet valve. Their compact size requires little mounting space. The VM series offers a wide variety of actuator styles and flow capacity up to 1.0 Cv.- Actuator replacements for VM100, VM200, VM400 and VM800
- Roller levers, plungers, toggle levers, rod levers, push buttons and twist selectors
SMC VXS265KLA SOLENOID VALVE FOR STEAM 2/2
SMC VXS265KLA Two Port Pilot Operated Solenoid Valve
Zero pressure differential pilot solenoid valves from SMC requiring no fluid pressure for operation suitable for use with steam and heated water. Service life has been increased to 3 million cycles by using an improved scraper design that is contaminant resilient. Air leakage has also been reduced. This new series of solenoid valves are also greener consuming less energy and quieter in operation due to a rubber buffer design.
- Reduced power consumption
- Standardized 24 V dc DIN terminal
- Minimal internal air leakage
- Stainless Steel or Brass body
- Low noise operation
- Improved armature durability
- Double guide rings for improved foreign object resistance
SMC VZM550-01-08 MECHANICAL VALVE 5/2 PORT
SMC VZM550-01-08 MECHANICAL VALVE 5/2 PORT
The VZM series is a 5 port mechanical valve. It is compact in design with a large flow capacity (VZM400 Cv 0.55, VZM500 Cv 0.6). The VZM is available in a metal or rubber spool style, with a variety of actuator choices and optional external pilot.- Fluid: air, inert gas
- Operating pressure: 0.15 to 0.7MPa
- Ambient and fluid temp: -5 to 60C (no freezing)
- Effective area (Cv): 0.6
- Port size: main valve Rc(PT) 1/8, pilot valve (EXH) M5x0.8
SMC SY5220-4D-01 5/2 WAY DOUBLE SOLENOID VALVE 1/8 COIL 220VAC SY5220-4D-01
SMC SY5220-4D-01Â - 5/2 WAY DOUBLE SOLENOID VALVE 1/8 COIL 220VAC SY5220-4D-01
SMC has improved product performance and reliability with the redesigned SY series valve. The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved. Side, top and bottom port/pipe directions are available to allow flexible installation. The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.SMC CDM2E32-125Z AIR CYLINDER ROUND DOUBLE ACTING
SMC CDM2E32-125Z AIR CYLINDER
ROUND DOUBLE ACTING
Series CM2 stainless steel cylinders are compact, lightweight and offer high performance. Improved piston seal and rod seal greatly improve the units life. Rubber bumpers are standard. The CM2 series offers a variety of mounting options and is auto switch capable.- Double acting single rod
- Bore sizes: 20, 25, 32, and 40 *
- Strokes from 25mm through 500mm
- Mounts: basic, foot, front and rear flange, clevis, trunnion
- With or without rod boot
- Variety of switches and a variety of lead wire lengths
SMC CS95-40 SEAL KIT 40DIA C95/C96
SMC CS95-40 SEAL KIT 40DIA C95/C96
The C95 is ISO, VDMA24562 interchangeable, and utilizes a tie rod construction. In addition to standard cushions and wear band, the C95 utilizes a "floating" cushion seal design that greatly improves operation.SMC GKM10-20 ROD CLEVIS FOR 25MM BORE GKM10-20
SMC GKM10-20 ROD CLEVIS FOR 25MM BORE GKM10-20
Mountings
SMC C85 pneumatic cylinder foot mounts, available singularly, with one locknut or as a pair. The foot mounts are suitable for use with C85 series single and double-acting C85 pneumatic cylinders.
C85 cylinders are corrosion-resistant, with the barrel and piston rod manufactured from stainless steel, incorporate double-swaged anodised aluminium end caps, and offer an exceptional service life. The double-swaged end caps provide an air tight seal. SMC C85 cylinders conform to ISO 6432 and CETOP RP52P standards, offer 100% mounting repeatability accuracy, incorporate abrasion-resistant seals, and a replaceable piston rod seal.
The cylinders offer high dust resistance through the use of a specially-designed and unique dust seal, making SMC C85 pneumatic cylinders suitable for use in extremely dusty environments. A low friction design that incorporates elastomer cushion seals allows the the cylinders to operate at speeds up to 1500 mm/s. Installation is made easy through the use of large spanner flats and the space-saving design.
SMC AS2201F-02-08SA SPEED CONTROLLER ELBOW
SMC AS2201F-02-08SA SPEED CONTROLLER ELBOW PUSH LOCK TYPE OUT 8MM 1/4"
Using SMC speed controls with built in one-touch fittings minimizes installation time, reduces mounting height and enables a more compact machine design. These speed controls allow the body to be rotated to facilitate simple installation. Available in thread sizes from M3 to 1/2 in both inch (NPT) and metric R(PT) and with tube sizes from 3.2mm to 12mm OD (metric) and 1/8 to 1/2 OD (inch) and with optional elbow and universal style (increased flexibility) and meter-in and meter-out, these speed controls are designed to meet most applications.- Elbow type, speed control with one-touch fitting
- Improved, larger push-lock handle
- Easy identification of meter-in (blue handle) vs. meter-out (gray handle)
- Max. operating pressure 1MPa
- Applicable tubing material: nylon, soft nylon, polyurethane