TORK AUTO DRAIN SOLENOID VALVE 2/2 1/2″ WITH TIMER 220V AC

TORK  AUTO DRAIN SOLENOID VALVE

2/2, 1/2″ WITH TIMER 220V AC

GENERAL FEATURES

• The standby and drainage periods can be regulated by the timer on itself. It is attached to the part of the valve which is drained. The valve is opened to drain on time which the timer is programmed.
• On request; normally open types
• Suitable for non-aggressive liquids (water, light oil (2E) etc… ), gaseous fluids (air, inert gases etc…)
• Working temperature: -10°C / +80°C
• Not suitable for use with dangerous fluids listed in Group 1
• Don’t require any differential pressure to operate
• Compact and low weight valve enabling easy and quick installation
• High reliability, quality and performance; long life, corrosion resistance
• Wide pressure ratings, range of flow rate and orifice options
• On request; solenoid valve can have 1 mounting hole at the bottom of the body.
• Ideal for the automatic control of media in a wide range of applications.
• TORK solenoid valves satisfy relevant 97/23/EC. Pressure Equipment Directive (PED) and 2006/95/EEC Low Voltage Directive (LVD)
• Some applications; separator main drainage
• Coils interchangeable
• Flow factor Kv of each valve is indicated, so that the flow O can be calculated as a function of pressure
• Solenoid valves must be used with filtered fluids.
• Solenoid valve can be mounted in any position without affecting operation; vertical with coil upwards preferred.
• Standard pipe connection is G (BSP) (ISO 228-1) and on request; other pipe connections are available (NPT (ANSI 12031)

ELECTRICAL CHARACTERISTICS

Continuous Duty  : ED %100

Coil Insulation Class    : H (180°C)

Coil Impregnation   : Polyester Fiber Glass

Coil Encapsulation Material : Fiber Glass Reinforced

Ambient Temperature  : -10°C, +60°C

Protection Degree    : P 65 (EN 60529) with coil duly fitted with   the plug connector

Electric Plug Connection   : DIN 46340 3-Poles Connector (DIN 43650)

Connector Specification   : ISO 4400 / EN 175301-803 Form A, Spade Plug (Cable Ø6-8 mm)

Electrical Safety : IEC 335

Standard Voltages    : For AC 12V, 24V, 48V, 11DV, 230V

: For DC 12V, 24V, 48V, 110 V

On request other voltages

Voltages Tolerance   : AC -15%, +10% DC -5%, +10%

Frequency     : 50 Hz, other frequencies on request; (60 Hz)

On request; connector with LED Specify coil voltage with order

commitment engineering, automation, automation spare parts, pneumatic valve